This product is prepared by a variety of sodium free salts and other inorganic compounds according to a certain proportion, and processed by a special process, after the treatment of molten slag, will become quite dry, loose, reduce the loss of aluminum liquid, improve the purity of aluminum liquid

• Properties: white or off-white powder (1kg/ bag or 2.5kg/ bag)

• Processing temperature: 710℃ ~ 780℃

• Recommended dosage: Add 0.2 ~ 0.5% of liquid aluminum by weight, depending on the type of furnace and the purity of the charge

• Packing and storage: carton or woven bag, each box 20kg or 25kg, keep it properly and prevent moisture

Major advantage

1. Because this product does not contain sodium, it avoids or reduces the phenomenon of white spots on the surface of aluminum and aluminum alloys

2, good heating, separation of impurities in the slag, and decomposition of alumina in the slag, so that the aluminum slag is dry and loose, easy to remove

3, after treatment, the purity of aluminum liquid is greatly improved, the alloy properties are effectively improved, and the aluminum consumption is reduced

4, reduce the slag adhesion to the furnace wall and bottom, avoid the damage of the furnace body, extend the service life of the furnace body and reduce the number of cleaning

Usage method

When there is slag and aluminum on the surface of liquid aluminum, the slag cleaning agent is evenly sprinkled on the surface of liquid aluminum. At this time, due to the reaction of slag cleaning agent, a lot of heat is released, so that the slag is heated up rapidly and red, and the aluminum slag is stirred in time, so that the flux is fully in contact with the aluminum slag for 3-5 minutes, and the slag can be removed after dry powder